10
Operation
Step # Description
Action
Notes
1
Select program
mode.
Press "Selection programming mode"
until the LED indicating the program to
be set is lit (preset counter or sheet
insertion program).
2
View program mode. Press "Counter reset button".
The display will show
the value flashing.
3
Program a new
value.
Press "Counter reset button" to
access the last digit.
Press "Selection programming mode"
to change the setting.
Press "Counter reset button" to
confirm the setting and access the
second digit.
Repeat this for the remaining (2) digits
starting with pressing "Selection
programming mode".
After adjusting the last digit, press
"Counter reset button" to confirm the
settings made.
Repeat
these
two
steps
Display shows
000
LED Indication Description
Notes
Continuous
light
On-line mode selected
Flashing
Connected unit stopped
LED indication,
On-line
4.7 Programming preset counter & sheet insertion program
4.8 LED indications, third party device