manualshive.com logo in svg

Pitney Bowes ADDRESSRIGHT DA950, Operator'S Manual

Share
Download
Pitney Bowes ADDRESSRIGHT DA950 Operator'S Manual Download Page 80

A-14

Printer Menus

 8. Conveyor 

Time

This setting can only used if the model of conveyor 
stacker being used supports this function. This item in-
creases the length of time the stacker will stay on. It can 
be set from 0.00 to 2.00 seconds.

Generally, when the print quality is set higher than draft, 
and/or, print width is larger than normal, the drying time 
of printed records must be increased to prevent smear-
ing or smudging of addresses. Changing the time that 
the conveyor remains on alters how the media is shin-
gled on the conveyor.

Special consideration of ink drying time and media han-
dling for glossy or Tyvek media should also be consid-
ered when using a conveyer.

9.   Image Overlay

This menu item is used in conjunction with the Over-
lay Printer Driver. Use this option to print ‘static’ text or 
graphics in the same location on every piece. The Image 
Overlay option is best used for printing a company logo 
and return address.

A.  First Image Overlay

This option saves the very first record or graphic re-
ceived into the printers’ memory as an overlay.

B.  Clear Overlay 

This option clears the overlay data in the printer’s mem-
ory.

C.  Print Overlay First

This option prints the data sent for the overlay onto the 
first piece. Use this piece to verify the location of the 
overlay is correct.

For instructions how to use the menus and select an op-
tion, refer to page A-4.

 Using the 
Main Menu 
(continued)

SV61183 Book.indb   A-14

SV61183 Book.indb   A-14

6/9/2004   9:17:03 AM

6/9/2004   9:17:03 AM

Summary of Contents for ADDRESSRIGHT DA950

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands