manualshive.com logo in svg

Pitney Bowes ADDRESSRIGHT DA950, Operator'S Manual

Share
Download
Pitney Bowes ADDRESSRIGHT DA950 Operator'S Manual Download Page 104

B-4

Specifi cations

  Printhead/InkJet Cartridges

Cartridges: User-replaceable ink jet. Available are: Single 
‘Standard’ Black Ink Cartridge; Single ‘Versatile’ Ink Car-
tridge; and a High Capacity Ink Reservoir System.

Contact Pitney Bowes to order.

Environmental Limits

Operating Conditions:Temperature—55 to 95°F (12 to 
35°C);
Humidity—8 to 80%

Storage Conditions: Temperature—42 to 100°C (5 to 
40°C); 
Humidity—10 to 90%

Noise Level

Idle Mode: <6.6 Bel (A)

Operating Mode: <7.3 Bel(A)

Operator position: no more than 65 dBa referenced to 20 
µpa.

Recommended Usage

Pitney Bowes has tested this machine under many differ-
ent conditions, and recommends that you do not exceed 
the usage levels specified below:

•  Typical monthly usage is 500,000 pieces. Maximum 

monthly throughput is 1,000,000 pieces.

 NOTE:

  Usage beyond these recommended cycles 

is not covered under your Equipment Maintenance 
Agreement. 

•  Yearly usage is 6,000,000 pieces.

•  Product life is 5 years or 30,000,000 cycles (whichever 

comes first).

Equipment 
Specifications
(continued)

SV61183 Book.indb   B-4

SV61183 Book.indb   B-4

6/9/2004   9:17:10 AM

6/9/2004   9:17:10 AM

Summary of Contents for ADDRESSRIGHT DA950

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands