background image

L20-406 Rev 7 (01/17)  Page  2

WARNING

DO NOT store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any other 

appliance.

WARNING

Improper installation, alteration, service or maintenance 

can cause property damage, injury or death. Read the 

installation, operating and maintenance instructions 

thoroughly before installing or servicing this appliance.

WARNING

Installation, maintenance and repairs should be per

-

formed by a Pitco Authorized Service and Parts (ASAP) 

company technician or other qualified personnel.  In

-

stallation, maintenance or repairs by unauthorized and 

unqualified personnel will void the warranty.

WARNING

Installation and all connections must be made accord

-

ing to national and local regulations and codes in force.

WARNING

A country approved all pole circuit breaker with a 

minimum open contact gap of 3mm must be used for 

proper installation.  (CE countries)

WARNING

During the warranty period if a customer elects to use 

a non-original part or modifies an original part pur

-

chased from Pitco and/or its Authorized Service and 

Parts (ASAP) companies, this warranty will be void.  In 

addition, Pitco and its affiliates will not be liable for any 

claims, damages or expenses incurred by the cus

-

tomer which arises directly or indirectly, in whole or in 

part, due to the installation of any modified part and/or 

received from an unauthorized service center.

WARNING

This appliance, when installed, must be electrically 

grounded in accordance with local codes, or in the ab

-

sence of local codes, with the National Electrical Code, 

ANSI/NFPA 70, or the Canadian Electrical Code, CSA 

C22.2, as applicable.

WARNING

Adequate means must be provided to LIMIT the 

movement or this appliance without depending on the 

electrical cord connection.  Single appliances equipped 

with legs must be stabilized by installing anchor straps.  

All appliances equipped with casters must be stabilized 

by installing restraining chains.

WARNING

DO NOT alter or remove structural material on the ap

-

pliance to accommodate placement under a ventilation 

hood.

WARNING

This appliance is intended for commercial/professional 

use only and should be operated by fully trained and 

qualified personnel. It is not intended for continuous 

mass production of food.

WARNING

This appliance is intended for indoor use only.

WARNING

If the power supply cord is damaged, it must be re

-

placed by a Pitco Authorized Service and Parts (ASAP) 

company technician, or a similarly qualified person in 

order to avoid a hazard. In Europe, supply cords must 

be oil resistant, sheathed flexible cable not lighter than 

ordinary polychloroprene or other equivalent synthetic 

elastomer-sheathed cord (Code designation 60245 IEC 

57).

WARNING

The power supply must be disconnected before servic

-

ing, maintaining or cleaning this appliance.

WARNING

The appliance is NOT water jet stream approved.  DO 

NOT clean the appliance with a water jet or steam 

cleaner.

WARNING

DO NOT attempt to move this appliance or transfer hot 

liquids from one container to another when the unit is at 

operating temperature or filled with hot liquids. Serious 

personal injury could result if skin comes in to contact 

with the hot surfaces or liquids.

WARNING

DO NOT sit or stand on this appliance. The appliance’s 

front panel, tank, splash back, tank cover, work shelf, 

drain board is not a step.  Serious injury could result 

from slipping, falling or contact with hot liquids.

WARNING

NEVER use the appliance as a step for cleaning or 

accessing the ventilation hood.  Serious injury could 

result from slips, trips or from contacting hot liquids.

WARNING

Potential fire danger exists if the cooking oil level is 

below the minimum indicated level. The cooking oil 

level should NOT be allowed to fall below the minimum 

indicated level line at any time. The use of old cooking 

oil can be dangerous as it will have a reduced flash 

point and be more prone to foaming over.

WARNING

The contents of the crumb catch and/or filter pan of any 

filter system must be emptied into a fireproof container 

at the end of each day.  Some food particles can spon

-

taneously combust if left soaking in certain types of oil 

or shortening.

WARNING

Completely shut the appliance down when shortening/

oil is being drained from the appliance. This will prevent 

the appliance from heating up during the draining and 

filling process.  Serious injury can occur.

WARNING

DO NOT operate appliance unless all panels and ac-

cess covers are attached correctly.

WARNING

It is recommended that this appliance be inspected by 

a qualified service technician for proper performance 

and operation on a yearly basis.

TO THE PURCHASER, OWNER AND STORE MANAGER

Please review these warning prior to posting them in a prominent location for reference

Summary of Contents for SELV14





























Reviews: