SERVICE
28
L22-236 Rev. 2 (06/11)
10. Remove cabinet bottom rear cover.
11. For filter equipped fryers, remove cotter pin
securing return valve handle to valve link.
Save flat and spring washer for reinstallation.
12. For filter equipped fryers loosen and
disconnect return tubing flare fittings to
adjacent fryer(s). (On split tanks, leave tubing
between the two tank halves intact. This can
be removed when tank is out of cabinet.)
13. Remove screws securing splashback to
cabinet rear using 5/16” hex bit.
14. Remove screws securing splashback to rear of
tank using flat bladed screwdriver, and remove
splashback.
15. Remove front panel bezel, bottom rail, heat
shield, and top deck. (See Section 5.1.4.)
16. Remove channel strip(s) between adjacent fry
tank(s).
17. Cut sealant bead between adjacent fry tank(s),
using utility knife.
18. Remove 4 tank to cabinet mounting screws at
front of tank, using 5/16 hex bit.
WARNING! SHUT OFF APPLIANCE AND DISCONNECT ALL POWER
CONNECTIONS PRIOR TO STARTING ANY SERVICE WORK
