Pitco ME14S-C/MFD, Service Manual

Page: 15 / 38

11
Control Relays:
Control relays are always wired in the following man-
ner -
Proximity Switches:
1. The actuator can be removed by removing the 2
mounting screws.
2. The sensor may be removed by disconnecting
the wiring harness and by removing the 2 mount-
ing screws.
Install in the reverse order.
Filter Pumps:
1. From the front of the machine, pull the ring back
on each of the 2 quick disconnects and release
the couplings.
2. Remove the 2 screws, and the front of the Pump/
Motor assembly will drop. The assembly can be
removed from the machine by lifting the rear
slightly and pushing back. The front of the mount
can be lowered until the assembly can be re-
moved from the machine.
Install in the reverse order.