Section One: ASSEMBLY INSTRUCTIONS
INSTALLING THE GREASE TRAY
Page 15
HOPPER FUEL CHANGE OUT
A
B
C
Your Pit Boss grill may come with a Fuel
Change Out feature. This feature allows for
easier change out of fuel flavors and cleaning
out of the hopper with the safety screen
installed.
Ensure Slide Plate (B) is secured in place.
TO USE:
1. Place a clean, empty bucket under the drop
chute.
2. Remove the Drop Chute Cover. (c)
3. Remove screw securing plate (B).
4. Slide plate (A) fully out toward you.
Note: The hopper will not empty 100%.
** Due to ongoing improvements, product is subject
to change without notice.
Tools Required:
1 x # 14 Chrome Handle
1 x # 15 Grease Tray
1– Phillips Screwdriver
Parts Needed:
FINAL INSPECTION AND CLEANING:
ALWAYS clean dirt, dust and oils from ALL surfaces before you use the unit. This can cook into the metal and
discolor it.
Using a soft cloth and hot soapy water, thoroughly clean all surfaces and ensure all screws are secure.
Stainless Steel Cleaner and a soft rag can be used on all stainless surfaces.
TIP
To aid in cleaning and reduce maintenance, line the
grease drawer with foil, or a thin layer of sand.
Grease Drawer
Remove the two (2) screws from the bar hanger.
Insert the screws through the two (2) holes provided in the
front of the grease tray # 15.
Using a Phillips screwdriver to tighten to a snug, secure fit.
Simply slide the drawer into the opening supplied.