background image

ENGLISH

25

WARRANTY

CONDITIONS

All wood pellet grills by Pit Boss, manufactured by Dansons Inc., carry a limited warranty from the date of sale by the original 

owner. The warranty coverage begins on the original date of purchase and proof of date of purchase, or copy of original bill of 

sale, is required to validate the warranty. Customers will be subject to parts, shipping, and handling fees if unable to provide 

proof of the purchase or after the warranty has expired.
Dansons carries a one (1) year warranty against defects and workmanship on all parts, and one (1) year on electrical components. 

Dansons warrants that all part(s) are free of defects in material and workmanship, for the length of use and ownership of the 

original purchaser. Warranty does not cover damage from wear and tear, such as scratches, dents, dings, chips or minor cosmetic 

cracks. These aesthetic changes of the grill do not affect its performance. Repair or replacement of any part does not extend past 

the limited warranty beyond the one (1) year from date of purchase.
During the term of the warranty, Dansons’ obligation shall be limited to furnishing a replacement for defective and/or failed 

components. As long as it is within the warranty period, Dansons’ will not charge for repair or replacement for parts returned, 

freight prepaid, if the part(s) are found by Dansons’ to be defective upon examination. Dansons’ shall not be liable for 

transportation charges, labor costs, or export duties. Except as provided in these conditions of warranty, repair or replacement 

of parts in the manner and for the period of time mentioned heretofore shall constitute the fulfillment of all direct and derivate 

liabilities and obligations from Dansons to you.
Dansons takes every precaution to utilize materials that resist rust. Even with these safeguards, the protective coatings can be 

compromised by various substances and conditions beyond Dansons’ control. High temperatures, excessive humidity, chlorine, 

industrial fumes, fertilizers, lawn pesticides and salt are some of the substances that can affect metal coatings. For these reasons, 

the warranty does not cover rust or oxidization, unless there is loss of structural integrity on the grill component. Should any of 

the above occur, kindly refer to the care and maintenance section to prolong the lifespan of your unit. Dansons recommends the 

use of a grill cover when the grill is not in use.

Part# Description

1-PH Hopper Lid

2-PH Hopper Safety Screen
3-PH Hopper Box Housing With Window

4-PH Hopper Access Panel
5-PH Drop Chute Plate
6-PH Drop Chute Cover

7-PH Auger Motor

8-PH Nylon Bushing
9-PH Auger Flighting Assembly

10-PH Hopper Housing Gasket

11-PH Fire Pot

12-PH Auger Box Housing
13-PH Igniter

14-PH Combustion Fan
15-PH Pit Boss V2 Control Board
16-PH Grill Temperature Probe

HOPPER REPLACEMENT PARTS

1-PH

2-PH

3-PH

4-PH

5-PH

6-PH

7-PH

8-PH

12-PH

13-PH

14-PH

15-PH

16-PH

9-PH

10-PH

11-PH

Summary of Contents for 72755

































Reviews: