background image

ENGLISH

26

This warranty is based on normal domestic use and service of the grill and neither limited warranty coverage’s apply for a grill 

which is used in commercial applications.

EXCEPTIONS

There is no written or implied performance warranty on Pit Boss grills, as the manufacturer has no control over the installation, 

operation, cleaning, maintenance or the type of fuel burned. This warranty will not apply nor will Dansons assume responsibility 

if your appliance has not been installed, operated, cleaned and maintained in strict accordance with this owner’s manual. Any 

use of gas not outlined in this manual may void the warranty. The warranty does not cover damage or breakage due to misuse, 

improper handling or modifications.
Neither Dansons, or authorized Pit Boss dealer, accepts responsibility, legal or otherwise, for the incidental or consequential 

damage to the property or persons resulting from the use of this product. Whether a claim is made against Dansons based on 

the breach of this warranty or any other type of warranty expressed or implied by law, the manufacturer shall in no event be 

liable for any special, indirect, consequential or other damages of any nature whatsoever in excess of the original purchase of this 

product. All warranties by manufacturer are set forth herein and no claim shall be made against manufacturer on any warranty 

or representation.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations of implied warranties, 

so the limitations or exclusions set forth in this limited warranty may not apply to you. This limited warranty gives you specific 

legal rights and you may have other rights, which vary from state to state.

ORDERING REPLACEMENT PARTS

To order replacement parts, please contact your local Pit Boss dealer or visit our online store at: 

www.pitboss-grills.com

CONTACT CUSTOMER SERVICE

If you have any questions or problems, contact Customer Service, Monday through Sunday, 4am - 8pm PST (EN/FR/ES).

[email protected]  |  Toll-Free: 1-877-303-3134  |  Toll-Free Fax: 1-877-303-3135

WARRANTY SERVICE

Contact your nearest Pit Boss dealer for repair or replacement parts. Dansons Inc. requires proof of purchase to establish a 

warranty claim; therefore, retain your original sales receipt or invoice for future reference. The serial and model number of your 

Pit Boss can be found on the hopper. Record numbers below as the label may become worn or illegible. 

MODEL

SERIAL NUMBER

DATE OF PURCHASE

AUTHORIZED DEALER

Summary of Contents for 72755

































Reviews: