No Diving or Jumping. Observe all Safety Rules
5-1
Section
5
POOL MAINTENANCE
MAINTAINING YOUR POOL
POOL MAINTENANCE
Keep your pool wall and frame clean. Always wash away any deposits of pool chemicals which land on the frame of your pool.
Wash periodically with a mild soap solution (no abrasives). At least once a year use a clear non-yellowing household wax on all
metal components.
Your pool and liner must be inspected regularly for leaks, corrosion, scratches, and punctures. If any problem is found
IMMEDIATE
CORRECTIVE ACTION MUST BE TAKEN
. Small repairs and punctures in your liner may be easily repaired using repair kits
available at your local dealer. Scratches on your pool wall & frame must be touched up with anti-rust enamel. Wire brush all rust
and add a coat of enamel primer followed by a coat of color matching paint. Pool water is full of various caustic chemicals, which
will corrode metal parts. If any corrosion is allowed to continue, failure of the pool structure may occur which could result in
excessive property damage as well as bodily harm.
The skimmer & return area and below it are particular areas that must be carefully and regularly inspected. If this area is
wet, and remains wet for any length of time, it usually means there is a small leak. Skimmer/skimmer return gaskets must
be replaced when they become defective. Water must not be permitted to continually run down the wall, if neglected pool
will break. If proper skimmer/skimmer return gasket care is not maintained, your warranty will be void!
Important Note:
Be sure to follow all local and state safety regulations when installing any accessory to your pool. Any decks, and all entries, must
be carefully monitored for safety and access to pool. Installing any other manufacturer’s deck or slide is strictly forbidden!
