No Diving or Jumping. Observe all Safety Rules
Section
3
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL WALL
Section
3
16
e. A vacuum cleaner can later be used to remove the air
from between the liner and the wall. This technique
enables you to remove folds in the liner. However the
following precautions should be taken:
Do not use an industrial vacuum cleaner which could be
too powerful.
Tape the end of the vacuum hose before inserting it into
the wall so as not to damage the liner.
Insert the nozzle until it is about 4” (10cm) above
the cove (insert through the water return outlet or the
skimmer depending on the diameter of your hose). Make
sure you will be able to remove the hose later on.
Tape the hose to the wall.
(Image 16)
f. Close the skimmer opening with cardboard and adhesive
tape so that the suction of air works better.
(Image 17)
B. CONT. ASSEMBLING THE COVE
17
3-6
