Piscine Laghetto PLAYA 1, Use And Maintenance

Page: 47 / 144

47
PLAYA - USE AND MAINTENANCE
PARAMETER DESCRIPTION FUNCTION DEFAULT
U5
inhibition time
piezoelectric light
button
it sets the time in
which the piezoelectric
button is inhibited
after finishing the
cycle set in U2
parameter; only after
this time can be
pressed again
NOT PRESENT IN THIS
VERSION
ANTI STAGNATION FUNCTION (AUTOMATIC)
It is an automatic function that activates the blower for 30 seconds and the filter
pump for 3 hours when the latter has been off for more than 48 hours
ALARM SIGNALS
The following table summarizes all the signal codes of alarms, with their
descriptions, that the control unit is capable of signaling.
DISPLAYED
MESSAGE
ACTIONS TAKEN
BY THE CONTROL
SYSTEM
ITEM THAT
GENERATED
THE ALARM
POSSIBLE CAUSES RECOVERY MODE
no alarm, but
the controller's
display does not
turn on
-- -- lack of power.
Fuse of the
controller
interrupted
check the power
supply line.
Check the fuse
of the control
unit
no alarm, but
a shock is
perceived when
entering the
water
-- -- inadequate
grounding
check the
grounded
installation by a
technician
3. HEATER AND BUBBLES VERSION
IMPORTANT: In this version of PLAYA is mounted a 230V electric
heater from 2.000W able to raise to 15° C the water temperature
reached by the version without heater (data valid with a isothermal
coverage installed).