Piscine Laghetto PLAYA 1, Use And Maintenance

Page: 50 / 144

50
PLAYA - USE AND MAINTENANCE
KEY PUMP FILTER indicates when the filter pump is turned on
Only in Manual mode turns on and off the filter pump.
INCREASE-DECREASE KEY
Pressing and releasing quickly one of these two keys is possible to change
the setting of the water temperature. The display shows SP (= set point
water temperature) followed by ° C set. Change the value with the Up and
Down Keys and press the SET button to confirm. The heater comes into
operation after 3 minutes from each ignition of the control unit, a blinking
LED in the bottom right corner of the display indicates that the heater is in
operation.
SET KEY (BLOWER)
• Turns on and off the air massage.
• If pressed for 3 seconds changes the parameter shown
on the display (Water temperature-clock)
PARAMETER DESCRIPTION FUNCTION DEFAULT
A3
duration of the pump
filtration ignition
program 2
set the duration (00
÷ 23) of the filtration
pump operation for the
program 2
--
not adjustable
if
A0
= on
A4
time ignition light
set the start time (00 ÷
23) of light ignition
FF
= it turns on and off
with the keyboard
A5
duration of the light
ignition
set the duration (00
÷ 23) of the light
operation
00
= timer off
A6
not used parameter
00
A7
not used parameter 00
t0
Clock setting: hours set time (00 ÷ 23)
t1
Clock setting: minutes set minutes (00 ÷ 59)
heater led