Pool cleaning robot
8
4.2- Startup procedure
1
- Submerge the robot, and move it in all directions to expel
the air.
2
- Press foams with hands to saturate them with water
3
- Warning: in case the robot does not sink in water, it
certainly means that it still contains air. then repeat steps 1 and
2.
Ignition
: Press the button 1 . The ignition light
5
and
the cycle indicator
7
(
60 minutes - floor/wall bottom
)
will
light up.
You can choose another cycle length by using the button on
the remote control or on the control box. The LED lights
indicate which cycle is selected. It is possible to modify the
original cycle at any time at the beginning or during the
cycle.
(Factory setting 60 min.- floor and walls bottom).
Pic. 4.2.1
Pic. 4.2.2