Pool cleaning robot
3
2-
Overview
2.1- Functions
Automatic Cleaning: The default mode is automatic. It is possible to take control with
the remote. When the remote is not in use, your cleaning robot returns in automatic
mode.
Overall cleaning: your robot does not only cleans the bottom of your pool, it also
cleans your walls and stairs. Your robot filters the water retaining all dirt in the filter
bag.
Cleaning time: the remote control allows you to choose from three cleaning durations
(30 min, 60 min & 120 min.). The robot is factory programmed for a 60 minutes
cleaning cycle (floor and walls bottom). Your robot will automatically switch off when
the selected duration is over. The electrical box must be disconnected after use.
Manual cleaning: The remote control can be used at any time to clean immediately a
specific area.
Safety (out of the water): The helix stops immediately when the sensor indicates that
the robot is out of the water in order to prevent injury and protect the water pump.
Emergency stop: the robot stops automatically if a foreign object prevents the helix
from turning.
2.2- Technical sheet
Model
POOLBIRD pool cleaning robot
Input voltage
240 VAC / 50 Hz
Power
200 W
Program
length
30 min. / 60 min. / 120 min.
Standard cable length
20 meters
Filter bag
Standard: 70 μm + 20 μm
Water pump flow rate
18 m³/h
Speed
20 meters / min.
Sealing protection
IP68
Optimum storage temperature
0°C – 40°C
Optimum working temperature
0°C – 32°C
Dimensions (L * W * H)
452.5 * 487.8 * 292 mm
Packing dimensions (L * W * H)
574 * 574 * 413 mm
Overall total weight
20.6 kg
Cleaning robot weight
13.9 kg
