Pool cleaning robot
9
4.3- Shutdown procedure
a-
To turn off the robot
: Press the button . Slowly pull the cable until the handle comes
above the water. Use this handle to pull the robot and place it on the edge of your pool, allow
to drain.
NB: at the end of the cycle, the robot will automatically stop against a wall.
Pic 4.3.1
b-
Clean the robot bag
: After each use, the filter will need to be cleaned. In order to do this,
carefully turn the robot upside down on the floor and unlock the two clips (Pic. 4.3.2). Then
remove the bag from the frame and clean it bag with a water jet, or under a tap (Pic.4.3.3).
Once clean, put the bag on the metal frame and insert back into the robot when dry.
Occasionally, it is possible to wash the filter bag in the washing machine on the cold
program. (NB: When you put the bag on the frame, make sure that the long sides of the bag
are taut to ease the frame closing).
Pic. 4.3.2
Pic.4.3.3
4- Floating cable
6- Handle
