Page 11 of 19
8 Floor Head
The floor head has different attachments depending on the floor type.
For Hard Floors such as timber or tiled, etc., use the attachment (1).
To attach, locate the head attachment and then push to click on.
Note: Ensure the brush is towards the front and the rubber squeegee
towards the back.
To Remove, unclip the attachment and pull straight out.
For carpets, use the attachment (2).
To attach, locate the head attachment and then push to click on.
To Remove, unclip the attachment and pull straight out.
Note: Either attachment can be used on wet floors, however, attachment
(1) would be more suitable.
9 Vacuum Relief Valve
The vacuum hose handle is fitted with a vacuum
relief valve which is operated by sliding the cover
back or forward to open or close a hole in the
vacuum air stream.
If when vacuuming, you find the suction is too strong, slide the relief valve
cover to open the holes and the suction at the floor head will reduce.
For normal suction, slide the valve cover so that the holes are closed.
1
2
