background image

CAUTION

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT 
REMOVE COVER (OR BACK). NO USER-SERVICEABLE 
PARTS INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

D3-4-2-1-1_B1_En

WARNING

This equipment is not waterproof. To prevent a fire or 
shock hazard, do not place any container filled with 
liquid near this equipment (such as a vase or flower 
pot) or expose it to dripping, splashing, rain or 
moisture.

D3-4-2-1-3_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame 
sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH 
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in 
locations exposed to high humidity or direct sunlight 
(or strong artificial light).

D3-4-2-1-7c*_A2_En

This product is for general household purposes. Any 
failure due to use for other than household purposes 
(such as long-term use for business purposes in a 
restaurant or use in a car or ship) and which requires 
repair will be charged for even during the warranty 
period.

K041_A1_En

CAUTION

The 

STANDBY/ON

 switch on this unit will not 

completely shut off all power from the AC outlet. 
Since the power cord serves as the main disconnect 
device for the unit, you will need to unplug it from the 
AC outlet to shut down all power. Therefore, make 
sure the unit has been installed so that the power 
cord can be easily unplugged from the AC outlet in 
case of an accident. To avoid fire hazard, the power 
cord should also be unplugged from the AC outlet 
when left unused for a long period of time (for 
example, when on vacation).

D3-4-2-2-2a*_A1_En

CAUTION

This product is a class 1 laser product classified 
under the Safety of laser products, IEC 60825-1:2007.

CLASS 1 LASER PRODUCT

D58-5-2-2a_A1_En

When using this product, confirm the safety 
information shown on the bottom of the unit and the 
AC adapter label.

D3-4-2-2-4_B1_En

WARNING

Store small parts out of the reach of children and 
infants. If accidentally swallowed, contact a doctor 
immediately.

D41-6-4_A1_En

Store the AC adapter out of the reach of 
children and infants.

The AC adapter cord may accidentally wind around the 
neck and it may cause suffocation.

VENTILATION CAUTION

When installing this unit, make sure to leave space 
around the unit for ventilation to improve heat radiation 
(at least 20 cm at top, 10 cm at rear, and 10 cm at each 
side).

WARNING

Slots and openings in the cabinet are provided for 
ventilation to ensure reliable operation of the product, 
and to protect it from overheating. To prevent fire 
hazard, the openings should never be blocked or 
covered with items (such as newspapers, table-cloths, 
curtains) or by operating the equipment on thick carpet 
or a bed.

D3-4-2-1-7b*_A1_En

Summary of Contents for X-SMC11-k






































Reviews: