Connections
03
11
En
To customers in Norway and Sweden
CAUTION
• “Apparater som er koplet til beskyttelsesjord via
nettplugg og/eller via annet jordtilkoplet utstyr - og er
tilkoplet et koaksialbasert kabel-TV nett, kan forårsake
brannfare. For å unngå dette skal det ved tilkopling av
apparater til kabel-TV nett installeres en galvanisk
isolator mellom apparatet og kabel-TV nettet.”
• “Apparater som är kopplade till skyddsjord via jordat
vägguttag och/eller via annan utrustning och samtidigt
är kopplad till kabel-TV nät kan i vissa fall medföra risk för
brand. För att undvika detta skall vid anslutning av
apparaten till kabel-TV nät galvanisk isolator finnas
mellan apparaten och kabel-TV nätet.
Hang from the wall to use
CAUTION
When hanging the unit from a wall, firmly screw the
wall hanging screws (sold separately) into the wall,
and confirm that the wall is capable of holding the
unit safely. If the materials or strength of the wall
cannot support the weight of the unit, then there is
the possibility of the unit falling off.
Do not connect the
iPad/iPad mini
to the dock. The
unit is not compatible. Do not connect any device
that is not compatible. Please refer to page 15
for compatible or supported models. The
iPad/
iPad mini may fall and cause injury, or tilt over and
cause damage to the device (especially around the
connector section).
Hang the unit from the wall only after all connections
(including USB and headphones) are completed. If redoing the
connections, take the unit off the wall first.
When connections
are completed, connect the power cord to the AC outlet
while hanging the unit on the wall.
1
Screw the wall hanging screws into the
wall, putting them the specified attachment
measurement (154 mm) apart.
See
Dimensions (Rear)
on page 32.
2
Insert the wall hanging screws into the lock
holes.
Note
• Do not take your hands off the unit as the unit is still not
attached and may fall. Immediately continue on to step 3.
3
Slide to the left, and drop down.
Please confirm that the unit is securely attached.
Note
• When taking off the wall, move the unit in the opposite
direction from when mounting. Move up then slide to the
right.
• When attaching the unit to the wall, there is the
possibility of it falling depending on how it is attached.
Take due care to avoid any accidents.
• Select a location for the placement/installation of unit
that is sufficiently strong enough to hold the weight of
the unit. If you do not know the strength etc. of the wall,
then consult with a professional.
• The company bears no responsibility for accidents or
damages caused by inadequate installation/attachment,
incorrect use, modifications, natural disasters etc.
• Place all cables along the wall to prevent anyone from
tripping over them.
• When the unit is hanging from a wall, pay extra attention
to make sure your iPod/iPhone does not fall.
• Do not hold the unit by grabbing onto the iPod/iPhone
dock.
154
Lock holes
Wall hanging screws
(commercially available)
7 mm to 8 mm
2 mm to 3 mm
Suggested screw diameter
(Please use screws that match
the wall strength and wall
materials)
Screw head
ø
6.5 mm to
ø
10mm
Screw diameter
ø
4 mm
Center line
POWER ON
TIMER
TUNE
PUSH OPEN
BT CONNECT
17 mm
9 mm
