Additional information
13
90
En
SIRIUS radio messages
Note
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug
from the outlet and insert again to return to normal operating conditions.
CH Unavailable
The selected channel is not available. The channel
may have been reassigned to a different channel
number.
This message may occur initially with a new radio or
a radio that has not received XM’s signal for an
extended period.
Consult the latest channel guide at
www.xmradio.com for the current list of channels.
For cases of a new radio or a radio that has not
received XM’s signal for an extended period, allow
the radio to receive the XM satellite signal for at least
5 minutes and then try to select the channel again.
– – – – – – – –
No artist name or song title is available for this
selection.
No action required.
Upgrade XM Tuner
The connected XM CNP-1000 is incompatible. This
receiver features advanced technology that is
designed for use with the XM Mini-Tuner.
Contact XM Listener Care (1-800-967-2346) and ask
about upgrading your XM CNP-1000 to an XM Mini-
Tuner.
Have this receiver’s model name and CNP-1000 XM
Radio ID number ready beforehand, and explain that
this receiver is displaying the message
Upgrade XM
Tuner
.
If you already have an XM Mini-Tuner connected and
you see this message, turn off this receiver, make
sure the XM Mini-Tuner is properly seated in the
Mini-Tuner Dock, and then turn this receiver On
again. If the message reappears, contact XM
Listener Care and explain the issue that you’re
experiencing and the corrective actions you’ve tried.
XM Power Error
A short-circuit occurring in the antenna or
surrounding antenna cable.
Make sure that there is nothing unusual with the
antenna or antenna cable. Switch the power off,
then back on again.
Symptom
Cause
Action
Symptom
Cause
Action
Antenna Error
Antenna is not properly connected.
Check that the antenna cable is attached securely.
Check Sirius Tuner
SIRIUS Connect tuner is not properly connected.
Check that the 8 pin mini DIN cable and AC Adapter
are attached securely.
Acquiring Signal
The SIRIUS signal is too weak at the current location.
n/a
Subscription Updating
Unit is updating subscription.
Wait until the encryption code has been updated.
Updating Channels
Unit is updating channels.
Wait until the encryption code has been updated.
Invalid Channel
Selected channel is not available/does not exist.
Select another channel.
VSX-01TXH_KU.book 90 ページ ２００８年５月７日 水曜日 午後９時２分
