Pioneer VSX-LX504 Instruction Manual Download

Page: 72 / 203

≫

≫

≫

≫

≫

≫

To ARC/eARC TV

If the TV supports the ARC (Audio Return Channel) function (*), use only the

HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the

TV for connection. You connect the HDMI cable to the port labeled OUT on the

receiver side.

•

Another TV or projector can be connected to the HDMI OUT SUB jack. Switch

between MAIN and SUB using the HDMI MAIN/SUB button (

p16

) on the

remote controller or "AV Adjust" (

p179

). Note that this jack is not ARC-

compatible.

•

If devices with different resolutions are connected to HDMI OUT MAIN jack

and SUB jack, images are output with the lower resolution.

•

If a 4K high-quality video is played, use a Premium High Speed HDMI Cable

or Premium High Speed HDMI Cable with Ethernet whose package has a

"PREMIUM Certified Cable" label.

Setup

•

Settings are required to use the ARC function. Select "Yes" for "4. ARC Setup"

in Initial Setup (

p182

). If "No, Skip" is selected, settings are required in the

System Setup menu after Initial Setup is completed. Press the button on

the remote controller to display the Home screen, then set "System Setup" -

"Hardware" - "HDMI" - "Audio Return Channel (eARC supported)" to "On".

(

p160

)

• For detailed settings for TV connection, CEC function and audio output, refer

to the instruction manual of the TV.

(*) ARC function: This function transmits the audio signals of the TV via an

HDMI cable, and plays the audio of the TV on this unit. Connection to an ARC-

compatible TV is complete with one HDMI cable. To check if the TV supports the

ARC function, refer to the instruction manual of the TV, etc.

HDMI cable

IN(ARC)

Summary of Contents for VSX-LX504












































































































































































































Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands

Pioneer VSX-LX504, Instruction Manual

Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands