Pioneer VSX-LX504 Instruction Manual Download

Page: 46 / 203

≫

≫

≫

≫

≫

≫

(Example 2) Use rear high speakers at the rear

3´ (0.9 m)

or more

The width between the rear high speakers should match the one for the front

speakers, and they should be installed minimum of 3’/0.9 m higher than the front

speakers, and tilted so they will point toward the listener.
11,12 Rear High Speakers

(Example 3) Use Dolby Enabled Speakers (Surround) at the rear

The Dolby enabled speakers are the special speaker that the sound is emitted

toward the ceiling, and have the effect the sound to come from above by

reflecting the sound on the ceiling.

The Dolby enabled speakers (surround) are installed on top of the surround

speakers.
11,12 Dolby Enabled Speakers (Surround)

(Example 4) Use Dolby Enabled Speakers (Surround Back) at the rear

The Dolby enabled speakers are the special speaker that the sound is emitted

toward the ceiling, and have the effect the sound to come from above by

reflecting the sound on the ceiling.

The Dolby enabled speakers (surround back) are installed on top of the surround

back speakers.

11,12 Dolby Enabled Speakers (Surround Back)

❏

Speaker Layouts and Selectable Listening

Modes (

p129

)

Summary of Contents for VSX-LX504












































































































































































































Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands

Pioneer VSX-LX504, Instruction Manual

Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands