Pioneer VSX-LX504 Instruction Manual Download

Page: 188 / 203

188

≫

≫

≫

≫

≫

≫

Troubleshooting

Power

❏

When the power is turned on, "AMP Diag Mode" appears on the display of the main unit.

•

The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display

of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an

abnormality with the speaker cable connection. When the diagnosis is complete, the following messages are displayed.

CH SP WIRE

If the unit returns to the normal ON state after "CH SP WIRE" appears on the display, the speaker cable may have been short-

circuited. After setting the power of this unit to standby state, connect the speaker cable again. Twist the wires exposed from the tip of

the speaker cable so that the wires do not stick out of the speaker terminal.

NG:



If the operation has stopped with "NG" displayed on the display, set the power of this unit to standby state immediately and remove the

power plug from the outlet. The unit may be malfunctioning. Consult a dealer.

❏

The unit turns off unexpectedly

•

The unit automatically switches to standby when the "System Setup" - "Hardware" - "Power Management" - "Auto Standby" setting in the Home

screen functions.

•

The protection circuit function may have operated due to an abnormal rise in temperature of the unit. In such a case, the power turns off

repeatedly even if the power is turned on each time. Secure sufficient ventilation space around the unit, wait for a while until the temperature of

the unit decreases. Then, turn the power on again.

WARNING

: If smoke, smell or abnormal noise is produced by the unit, unplug the power cord from the outlet immediately, and contact the dealer or

our company's Support.

(

p160

)

Audio

• Make sure that the speaker setup microphone is no longer connected.

•

Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct.

•

Make sure that none of the connecting cables are bent, twisted, or damaged.

• If the indicator on the display blinks, press on the remote controller to cancel muting.

•

While headphones are connected to the PHONES jack, no sound is output from the speakers.

•

When "System Setup" - "Source" - "Audio Select" - "Fixed PCM" in the Home Menu is set to "On", no sound is played when signals other than

PCM are input. Change the setting to Off.

Check the following if the problem persists after you have confirmed the above.

Summary of Contents for VSX-LX504












































































































































































































Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands

Pioneer VSX-LX504, Instruction Manual

Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands