Pioneer VSX-LX504 Instruction Manual Download

Page: 159 / 203

159

≫

≫

≫

≫

≫

≫

Hardware

HDMI

Change the settings of the HDMI function.

Setting Item

Default Value

Setting Details

HDMI CEC

Off

Setting this to "On" enables the input selection link

and other link functions with HDMI-connected CEC-

compatible device.

"On": When this function is used

"Off": When this function is not used

When this setting is changed, turn off and then on

again the power of all connected devices.

• Depending on the TV to use, a link setting may

be required on the TV.

•

This function is effective only when the device is

connected to the HDMI OUT MAIN terminal.

• Setting this to "On" and closing the operation

screen will display the name of the connected

CEC-compatible device and "CEC On" on the

main unit’s display.

•

When this function is set to "On", the power

consumption in standby state increases,

however, the increase in power consumption is

minimized by automatically entering the HYBRID

STANDBY mode where only the essential circuits

operate.

• If you operate the MASTER VOLUME dial on the

main unit when this setting is "On" and audio is

output from the TV speakers, audio will be output

also from the speakers connected to this unit. To

output audio from only either of them, change the

setting of this unit or TV, or reduce the volume of

this unit.

•

If abnormal behavior is observed when this is set

to "On", set it to "Off".

•

If a connected device is not CEC-compatible, or

if you are not sure whether it is compatible, set

it to "Off".

Setting Item

Default Value

Setting Details

HDMI Standby

Through

Off

When this is set to anything other than "Off",

you can play the video and audio of an HDMI-

connected player on the TV even if the unit is in

standby mode. Also, only "Auto" and "Auto(Eco)"

can be selected if "HDMI CEC" is set to "On". If you

select anything else, set "HDMI CEC" to "Off".

•

When this function is set to a value other than

"Off", the power consumption in standby state

increases, however, the increase in power

consumption is minimized by automatically

entering the HYBRID STANDBY mode where

only the essential circuits operate.

"BD/DVD", "GAME", "CBL/SAT", "STRM BOX",

"HDMI 5", "HDMI 6", "AUX": For example, if

you select "BD/DVD", you can play the device

connected to the "BD/DVD" jack on the TV even

if the unit is in standby mode. Select this setting

if you have decided which player to use with this

function.

"Last": You can play on the TV the video and audio

of the input selected immediately before the unit is

switched to standby.

"Auto", "Auto (Eco)": Select either of the settings

if the connected player conforms to the CEC

standard. You can play the video and audio of

the player on the TV using the CEC link function,

irrespective of what input is selected immediately

before the unit is switched to standby.

• To play a non-CEC compliant player on the TV,

turn the unit on and switch the input.

• When using a CEC-compliant TV, you can

reduce the power consumption in standby mode

by selecting "Auto (Eco)".

Summary of Contents for VSX-LX504












































































































































































































Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands

Pioneer VSX-LX504, Instruction Manual

Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands