VSX-AX4AVi-S
208
1
2
3
4
1
2
3
4
C
D
F
A
B
E
Diagnosis of the video and audio lines between HDMI input and HDMI output
How to diagnose the video and audio lines between HDMI input and HDMI output is explained here.
1. Make the preparations described in "Preparations for diagnosis of the HDMI block and related systems" on the
previous page.
2. Remove the COMPOSITE V Assy and S VIDEO Assy.
3. Connect between the HDMI connector and the chassis to mark common GND, as indicated in the photo below. *1
4. Connect a HDMI cable from the source equipment (DVD player, etc.) to HDMI IN 1 or HDMI IN 2.
5. Connect a HDMI cable between the HDMI OUT and a TV monitor.
6. Set the INPUT SELECTOR switch to HDMI function (for the connected HDMI).
*1: Be sure to connect between the HDMI connector and the chassis. Otherwise, operations will be unstable.
[Procedures]
[Tips]
• The following DVD players are compatible with this AV Receiver.
DV-989AVi-S (for Europe)
• Use an HDMI cable with the HDMI logo.
HDMI IN1
HDMI & DVC Assy
HDMI IN2
HDMI OUT
Connect a cable between the HDMI connector and the chassis.