VSX-AX4AVi-S
205
5
6
7
8
5
6
7
8
C
D
F
A
B
E
No picture and no sound
If the display does not support HDCP, HDMI connections
cannot be made. Make connections of the analog video
and audio cables.
Check the settings of the source equipment and the display.
Check the settings of the receiver.
Make connections with the analog video and audio cables.
The HDMI equipped component and the
display may not be compatible.
Make connections of the analog video
and audio cables.
It is likely that the HDMI equipped
component does not support the repeater
function. (*1)
Ask the manufacturer of the HDMI
equipped component.
Or make connections of the analog video
and audio cables.
Ex. Digital Set-top-box DirectTV STB H10
*1. "Not support the repeater function"
means some HDMI equipped components are
not compatible with HDMI connection via AV
Receiver with HDMI.
YES
YES
Depending on the conditions of the
analog video signal, the HDMI video
output may be distorted. If it is extremely
distorted, connect the analog video
output to the display.
YES
NO
Is the sound
available after the display is
disconnected and change the
AV Parameter setting
to "AMP"?
NO
Check the settings of the HDMI equipped component
and the display. Disconnect then reconnect the
HDMI cable.Recheck the settings of the unit.
Is the HDMI LED on the
Front Panel flashing
continuously?
In a case of no picture and no sound
C
Abnormal picture (color, etc.),
distorted picture
The signal from the HDMI equipped
component may be unstable. Turn the
HDMI equipped component off then
back on.
If the picture is distorted after switching
the input selection, setting YCbCr/RGB
of the HDMI equipped component to
RGB may stabilize the picture.
YES
NO
Has the picture
become abnormal after the input
selection was changed?
NO
Is the analog video
input?
In a case of abnormal picture
D
