Pioneer VSX-932, Basic Manual

Page: 44 / 90

12
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc� |
> Basic Manual
Setting Item Default Value Setting Details
Surr Back Left 10.0ft/3.00m Specify the distance between each speaker and
the listening position.
Surround Left 10.0ft/3.00m Specify the distance between each speaker and
the listening position.
Subwoofer 10.0ft/3.00m Specify the distance between each speaker and
the listening position.
•
Distance units can be switched by pressing MODE on the remote controller. When the unit is set as
feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the unit is set as meters, you
can set between 0.03 m and 9.00 m in increments of 0.03 m.
■ Channel Level
Setting Item Default Value Setting Details
Front Left 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Center 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Front Right 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Height Left 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Height Right 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Surround Right 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Surr Back Right 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Surr Back Left 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.