Pioneer VSX-834 Instruction Manual Download Page 84

Page: 84 / 104

≫

≫

≫

≫

≫

≫

Setting Item

Default Value

Setting Details

Pairing

Information

You can initialize the pairing information saved on

this unit.

Pressing ENTER when "Clear" is displayed

initializes the pairing information stored in this unit.

•

This function does not initialize the pairing

information on the BLUETOOTH wireless

technology enabled device. When pairing the

unit again with the device, be sure to clear

the pairing information on the BLUETOOTH

wireless technology enabled device in advance.

For information on how to clear the pairing

information, refer to the BLUETOOTH wireless

technology enabled device's instruction manual.

Device

Displays the name of the BLUETOOTH wireless

technology enabled device connected to the unit.

•

The name is not displayed when "Status" is

"Ready" and "Pairing".

Status

Displays the status of the BLUETOOTH wireless

technology enabled device connected to the unit.

"Ready": Not paired

"Pairing": Paired

"Connected": Successfully connected

•

Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH

function is started up.

3. Power Management

Change the settings for the power-save function.

Setting Item

Default Value

Setting Details

Sleep Timer

Off

You can allow the unit to enter standby

automatically when the specified time elapses.

Select a value from "30 minutes", "60 minutes" and

"90 minutes".

"Off": The unit does not automatically enter standby

mode.

Auto Standby

On/Off

This setting allows the unit to enter standby mode

automatically after 20 minutes of inactivity without

any video or audio input. (When "USB Power Out

at Standby" is enabled, the unit enters the HYBRID

STANDBY mode which minimizes the increase in

power consumption.)

"On": The unit automatically enters standby mode

("AUTO STBY" lights up).

"Off": The unit does not automatically enter standby

mode.

•

"Auto Standby" is displayed on the main unit’s

display and TV screen 30 seconds before

entering standby mode.

•

Default values vary depending on the regions.

Auto Standby in

HDMI Standby

Through

Off

Enable or disable "Auto Standby" while "HDMI

Standby Through" is on.

"On": The setting is enabled.

"Off": The setting is disabled.

• This setting cannot be set to "On" if "Auto

Standby" and "HDMI Standby Through" are set

to "Off".

USB Power Out

at Standby

Off

When this function is set to "On", electricity can be

supplied to the device connected to the POWER

OUT port even if this unit is in standby mode .

•

While using this function, power consumption

increases in standby mode, however, the

increase in power consumption is minimized by

automatically entering the HYBRID STANDBY

mode where only the essential circuits are

operating.

Summary of Contents for VSX-834








































































































Search results

Summary of Contents for VSX-834

Reviews:

Related manuals for VSX-834

Brands by name

Popular brands

Pioneer VSX-834, Instruction Manual

Search results

Summary of Contents for VSX-834

Reviews:

Related manuals for VSX-834

Brands by name

Popular brands