35
≫
≫
≫
≫
≫
≫
Connecting an AV Component in a Separate Room (ZONE B Connection)
Connecting a Pre-main Amplifier (ZONE B)
While performing playback in the main room (ZONE A), you can enjoy 2-ch audio
of the same source in the separate room (ZONE B) at the same time. Use an
analog cable to connect the ZONE B PRE/LINE OUT jack of this unit and the
LINE IN jack of the pre-main amplifier or power amplifier in the separate room.
Setup
When connecting the power amplifier, set "Zone B Output Level" to "Variable"
for "Speaker Setup" in the Initial Setup section (
). When setting "Zone
B Output Level" from the Setup menu, press on the remote controller, and set
"2. Speaker" - "Configuration" - "Zone B Output Level" (
) to "Variable". If
it is not set, a large volume is output and the power amplifier, speakers, etc. may
be damaged.
a
Analog audio cable
a
LINE
IN
Premain Amp.
