26
≫
≫
≫
≫
≫
≫
5.1 Channel System (Bi-Amping the Speakers)
1
2
4
5
3
6
For high-
frequency
For low-
frequency
You can configure a 5.1 Channel System (
p16
) by connecting front speakers that support Bi-Amping connection.
The Bi-Amping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar
connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction
manual of your speakers as well.
"Speaker Setup" settings during
Initial Setup (
p89
Speaker Setup
Select how many speakers you have.
Next
ENTER
Speaker Channels
Zone B Speaker
Speaker Impedance
5.1 ch
Yes
No
Fixed
6 ohms or above
Zone B Output Level
Subwoofer
- - -
Height Speaker
• Speaker Channels:
5.1 ch
•
Subwoofer:
Yes
• Height Speaker:
---
•
Zone B Speaker:
No
•
Zone B Output Level:
Set any
value
(
p35
• Speaker Impedance:
Set any
value
(
p22
Setup
If the setting item for "Bi-Amp" is
not displayed in "Speaker Setup" in
the Initial Setup section, press
on the remote controller after Initial
Setup is complete. Then select
"2.Speaker" - "Configuration", and
set "Bi-Amp" to "Yes". (
p73
