Other connections
11
61
En
English
Français
Deutsch
Nederlands
Italiano
Español
• Push down on the
PUSH OPEN
tab to
access the
USB
terminal.
Connecting your USB device to the
receiver
1
Switch on the receiver and your TV.
2
Press iPod USB on the remote control to
switch the receiver to the iPod USB.
NO DEVICE
appears in the OSD.
3
Connect your USB device.
1
The USB terminal is located on the front panel.
Loading
appears in the OSD as this receiver
starts recognizing the USB device connected.
After the recognition, a playback screen appears
in the OSD and playback starts automatically.
2
Basic playback controls
The following table shows the basic controls
on the remote for USB playback. Press
iPod
USB
to switch the remote control to the iPod
USB operation mode.
Important
If a
USB Error
message lights in the display,
try following the points below:
• Switch the receiver off, then on again.
• Reconnect the USB device with the
receiver switched off.
• Select another input source (like
BD
), then
switch back to
iPod USB
.
• Use a dedicated AC adapter (supplied with
the device) for USB power.
For more information on error messages, see
USB messages
on page 68.
If this doesn’t remedy the problem, it is likely
your USB device is incompatible.
Note
1 Make sure the receiver is in standby when disconnecting the USB device.
2 • If the file selected cannot be played back, this receiver automatically skips to the next file playable.
• When the file currently being played back has no title assigned to it, the file name is displayed in the OSD instead; when
neither the album name nor the artist name is present, the row is displayed as a blank space.
• Note that non-roman characters in the playlist are displayed as
*
.
• It is not possible to output the USB audio to ZONE 2.
MASTER
VOLUME
SPEAKERS
CONTROL
MULTI-ZONE
ON/OFF
MCACC
SETUP MIC
VIDEO INPUT
R
L
AUDIO
VIDEO
iPod
USB
This receiver
USB mass
storage device
VIDEO INPUT
R
L
AUDIO
VIDEO
iPod
USB
U S B
R : F l d S : O n
0 0 1 / 0 0 4
P L AY
R e t u r n
R e l a x Yo u r B o d y
K e v i n J a c k s o n
W e a r e a l l o n e
3 2 k b p s 0 : 0 1
M P 3
File/Folder number
File format
Repeat or Shuffle
Song name
Artist name
Album name
Elapsed time
Bit rates
Button
What it does
Starts normal playback.
Pauses/unpauses playback.
/
Press to skip to previous/next track.
/
Press and hold during playback to
start scanning.
Press repeatedly to switch between
Repeat Folder
,
Repeat One
and
Repeat All
.
Press repeatedly to switch between
Shuffle On
and
Shuffle Off
.
DISPLAY
Press repeatedly to change the song
playback information displayed in the
front panel display.
/
/
During playback, press to skip to
previous/next track.
TOP MENU
Press to return to the menu screen.
RETURN
Press to return to the previous level.
VSX-819H_KU.book Page 61 Thursday, December 25, 2008 8:36 AM
