Pioneer VSX-520, Operating Instructions Manual

Page: 42 / 160

Using the tuner 06
42
En
1 Tune to a station you want to memorize.
See Listening to the radio on page 41 for more
on this.
2 Press TUNER EDIT.
The display shows PRESET , then a blinking
MEM and station preset.
3 Press PRESET
/
to select the station
preset you want.
You can also use the number buttons.
4 Press ENTER.
After pressing
ENTER
, the preset number stop
blinking and the receiver stores the station.
Listening to station presets
You will need to have some presets stored to do
this. See
Saving station p resets on page 41 if
you haven’t done this already.
• Press PRESET
/
to select the station
preset you want.
• You can also use the number buttons on
the remote control to recall the station
preset.
Naming preset stations
For easier identification, you can name all of
your preset stations.
1 Choose the station preset you want to
name.
See Listening to station p resets above for how
to do this.
2 Press TUNER EDIT twice.
The cursor at the first character position is
blinking on the display.
3 Input the name you want.
Choose a name up to eight characters long.
• Use the PRESET
/
buttons to select
character position.
• Use the TUNE
/
buttons to select
characters.
• The name is stored when
ENTER
is
pressed.
Tip
• To erase a station name, follow steps 1 and
2, and press ENTER while the display is
blank. Press TUNER EDIT while the display
is blank, to keep the previous name.
• Once you have named a station preset,
Press DISP to show the name. When you
want to return to the frequency display,
press
DISP
several times to show the
frequency.
VSX-520_UCSMXCN_En.book 42 ページ ２００９年１２月１５日 火曜日 午後２時３３分