1
Press LIST to switch to the file name list
mode.
Names of files and folders appear in the dis-
play.
2
Use MULTI-CONTROL to select the de-
sired file name (or folder name).
Turn to change the name of file or folder;
press to play; push right to see a list of the
files (or folders) in the selected folder.
#
You can also change the name of file or folder
by pushing
MULTI-CONTROL
up or down.
#
To return to the previous list (the folder one
level higher), push
MULTI-CONTROL
left.
#
If the folder/file number is more than 100, last
2-digit of the folder/file number is displayed.
#
Number of the folders/files in the currently se-
lected folder will be indicated on the right side of
the display.
#
If you do not operate the list within about 30
seconds, the display is automatically returned to
the ordinary display.
Playing songs on iPod
Basic Operations
You can use this unit to control an iPod by
using a cable (e.g., CD-I200), which is sold se-
parately.
2
2
2
1
1
1
3
3
3
1
Song number indicator
2
Play time indicator
3
Song time (progress bar)
1
Connect the iPod to this unit.
Playback will automatically start.
While the iPod is connected to this unit,
PIONEER
(or
(check mark)) is displayed on
the iPod.
#
Before connecting the dock connector of this
unit to the iPod, disconnect the headphones from
the iPod.
#
After the iPod has been connected to this
unit, press
SOURCE
to select the iPod.
#
When removing the iPod from this unit, this
unit is turned off.
2
To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
3
To skip back or forward to another
song, push MULTI-CONTROL left or right.
Notes
!
Read the precautions with iPod on page 60.
!
If an error message such as
ERROR-11
is dis-
played, refer to
Understanding error messages
on page 58.
!
Connect directly the dock connector of this
unit to the iPod so that this unit works prop-
erly.
Operating this unit
En
18
Section
02
