!
External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!
When this unit
’
s blue/white lead is connected
to the vehicle
’
s auto-antenna relay control
terminal, the vehicle
’
s antenna extends when
this unit
’
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Use MULTI-CONTROL to adjust the
sound level.
Tuner
Basic Operations
6
6
6
1
1
1
1
2
2
2
2
4
4
4
4
5
5
5
5
3
3
3
1
Band indicator
2
Stereo (
5
) indicator
Shows when the selected frequency is being
broadcast in stereo.
3
LOC
indicator
Shows when local seek tuning is on.
4
Preset number indicator
5
Signal level indicator
Shows the radio wave strength.
6
Frequency indicator
1
Press SOURCE to select the tuner.
2
Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
FM-1
,
FM-2
,
FM-3
for FM or
AM
.
3
To perform manual tuning, push
MULTI-CONTROL left or right.
4
To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
If you push and hold
MULTI-CONTROL
left or
right you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL
.
Operating this unit
En
11
English
Section
02
