48
> Settings
|
modes: Dolby Digital, Dolby Digital Plus, Dolby Surround,
Dolby TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24,
DTS-HD High Resolution Audio, DTS-HD Master Audio,
DTS Neural:X, DTS Express, and DSD.
•
It cannot be set if the listening mode is Direct or Pure
Direct.
■
Other
Sound Delay :
If the video is behind the audio, you can delay the audio to
offset the gap. Different settings can be set for each input
selector.
•
This has no affect if the listening mode is Pure Direct
and the input signal is analog or DSD.
Sound Retriever
：
Improve the quality of the compressed audio. Playback
sound of lossy compressed files such as MP3 will be
improved. The setting can be separately set to each input
selector. The setting is effective with 2 ch signals with a
sampling frequency of 48 kHz or less. The setting is not
effective in the bitstream signals. This function works in
the Auto Surround, Stereo, Mono, Extended Stereo, and
Extended Mono listening modes.
Speakers
：
When Speaker B are used, you switch output between
Speaker A/B/A+B.
HDMI Out
:
Allows you to select the HDMI jack to output video signals
from "MAIN", "SUB", and "MAIN+SUB".
Audio Scalar
:
By selecting "Auto", "Hi-bit 32", "Upsampling", and "Digital
Filter" are each automatically set to the optimum values
so that you get the high-quality playback of music files
and CDs. The setting can be separately set to each input
selector. Select "Manual" if you want to manually adjust
"Hi-bit 32", "Upsampling", and "Digital Filter".
Hi-bit 32
:
By expanding the dynamic range of digital audio signal
sources such as CDs, DVDs, and BDs, it is possible to
achieve a smoother and more refined sound. The setting
can be separately set to each input selector. This can be
set when the sampling frequency is 44.1 kHz or more.
•
This cannot be set if "Auto" is selected for "Audio
Scalar".
Upsampling
:
By increasing the sampling frequency of PCM 2 channel
audio by a factor of 2 or 4, you can achieve high-quality
sound reproduction. The setting can be separately set to
each input selector. This can be set when the sampling
frequency is between 44.1 kHz and 96 kHz. This function
works in the Direct, Pure Direct, and Stereo listening
modes.
•
This cannot be set if "Auto" is selected for "Audio
Scalar".
Digital Filter
:
You can switch the type of digital filter in the AUDIO DAC
(digital analog converter). You can choose "Slow" (gives
the sound a soft and fluid feel), "Sharp" (gives the sound
more structure and firmer feel), or "Short" (gives the sound
a feeling of a quick start and moving forward). The setting
can be separately set to each input selector. This can be
set when the sampling frequency is 44.1 kHz or more.
•
This cannot be set if "Auto" is selected for "Audio
Scalar".
DRC
:
Make small sounds easily heard. It is useful when you
need to reduce the volume while watching a movie late
night. You can enjoy the effect only when playing Dolby
series and DTS series input signals.
•
It cannot be set if the listening mode is Direct or Pure
Direct.
•
The setting cannot be used in the following cases.
– If "Loudness Management" is set to "Off" when
playing Dolby Digital Plus or Dolby TrueHD
– When the input signal is DTS:X and "Dialog Control"
is other than 0 dB
Center Spread
:
Adjust the width of the sound field of the front channel
when playing in the Dolby Surround listening mode. To
spread the width of the sound field to the left and right, set
to "On". To concentrate sound in the center, set to "Off".
•
Depending on the speaker settings, this becomes "Off".
Dialog Control
:
You can increase the dialog portion of the audio in 1 dB
steps up to 6 dB so that you can make dialog easier to
hear over background noise.
•
This cannot be set for content other than DTS:X.
•
The effect may not be selectable with some content.
Dialog Enhancement
:
By adjusting the localization of the center elements, you
can make it easier to hear dialog in movies or give more
prominence to the vocals in music. If you are using front
high speakers, you can select from "1" (low) to "4" (high).
•
This cannot be set for DTS:X playback.
•
It cannot be set if the listening mode is Direct or Pure
Direct.
Summary of Contents for SC-LX901
Page 35: ...35 ...
