17
> Settings
|
Audio Adjust
Make advanced settings such as those related to multiplex audio or those related to the
volume of this unit.
■
Dual Mono/Mono
Setting Item
Default Value
Setting Details
Dual Mono
Main
Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be output
at the same time.
•
If multiplex audio is being played, "1
＋
1" will be
displayed when on the remote controller is
pressed.
Mono Input
Channel
Left+Right
Set the input channel to use for playing any 2 ch
digital source such as Dolby Digital, or 2 ch analog/
PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels
■
Dolby
Setting Item
Default Value
Setting Details
Loudness
Management
On
When playing Dolby TrueHD, enable the dialog
normalization function which keeps the volume
of dialog at a certain level. Note that when this
setting is Off, the DRC function that allows you to
enjoy surround at low volumes is fixed to off when
playing Dolby Digital Plus/Dolby TrueHD.
"On": Use this function
"Off": Do not use this function
■
Volume
Setting Item
Default Value
Setting Details
Mute Level
−
dB
Set the volume lowered from the listening volume
when muting is on. Select a value from "
−
dB",
"
−
40 dB", and "
−
20 dB".
Volume Limit
Off
Set the maximum value to avoid too high volume.
Select "Off" or a value between "
−
32 dB" and "
＋
17 dB".
Power On Level
Last
Set the volume level of when the power is turned
on. Select a value from "Last" (volume before
entering standby mode), "
−
dB", and "
−
81.5 dB"
to "
＋
18.0 dB".
•
You cannot set a higher value than that of
"Volume Limit".
Headphone Level 0.0 dB
Adjust the output level of the headphones. Select a
value between "
−
12.0 dB" and "
＋
12.0 dB".
Summary of Contents for SC-LX901
Page 35: ...35 ...
