Pioneer RM-V2400NA, Technical Manual

Page: 46 / 142

45
(Fig. 3-19)
H-shape frame assembly (L)
4
Rivet
5
Shield
2
H-shape frame assembly (L)
1
Screw (M5
×
35)
1
Stopper
Table
1
Base assembly
B-
5
Guide fixture
A-
5
Holder (R)
A-
5
Holder (L)
2
H-shape frame
assembly (R)
3
Horizontal frame assembly
A-
7
B-
6
Screw (M5
×
35)
4. ASSEMBLING THE SYSTEM
(1) Assembling the Projection Frame (RMF-V4011/V5011)
Assemble the projection frame as follows.
[1] Mount the stopper onto the base assembly and tighten the screws (M5
×
35). (2
×
2 points)
[2] Mount the H-shape frame assemblies (R) and (L), and tighten the screws (M5
×
10). (4
×
4 points)
[3] Mount the horizontal frame assemblies (two) and tighten the screws (M5
×
10). (4
×
4 points)
* As for the positions for tightening the screws in steps [2] and [3], push the frame against the corner fixtures in the two
directions indicated by the arrow.
[4] Attach the shield to the H-shaped frame assembly (L) using rivet, and paste the magic tape on the H-shaped frame
assembly (L) according to the magic tape pasted on the shield.
[5] Attach the fixtures (R) and (L) and tighten the screws (M5
×
10). (3
×
2 points)
[6] Place the projection unit on the base assembly, and secure the fixtures (R) and (L) and projection unit to each other with
the screws (M5
×
10). (2
×
2 points)
[7] Secure the movable part of the base assembly with the two screws (M5
×
35).
INSTALLATION AND ASSEMBLY