Pioneer RM-V2400NA, Technical Manual

Page: 106 / 142

105
[4] <GWB> (GET W/B DATA)-White balance adjustment data is output.
Format:Output in the following order.
1
STX (02H)
2
<LWT>/ LINEAR WHITE adjustment data (3 BYTE)
3
<CNT>/CONTRAST adjustment data (3 BYTE)
4
<BRT>/BRIGHTNESS adjustment data (3 BYTE)
5
<COL>/COLOR adjustment data (3 BYTE) Note 1)
6
<TNT>/TINT adjustment data (3 BYTE) Note 1) and Note 3)
7
<BLW>/BLUE LOW-LIGHT adjustment data (3 BYTE)
8
<GLW>/GREEN LOW-LIGHT adjustment data (3 BYTE)
9
<RLW>/RED LOW-LIGHT adjustment data (3 BYTE)
0
<BHI>/BLUE HIGH-LIGHT adjustment data (3 BYTE)
-
<GHI>/GREEN HIGH-LIGHT adjustment data (3 BYTE)
=
<RHI>/RED HIGH-LIGHT adjustment data (3 BYTE)
~
<SHP>/SHARPNESS adjustment data (3 BYTE) Note 1) and Note 5)
!
<ABL>/ABL LEVEL adjustment data (3 BYTE) Note 2) and Note 4)
@
<ABG>/ABL GAIN adjustment data (3 BYTE) Note 2)
#
ETX (03H)
Note 1)Dummy when INPUT=RGB
Note 2)No dependent on mode. (Has one data.)
Note 3)Dummy when PAL signal is input. (INPUT=VIDEO or Y/C)
Note 4)Dummy when COMBINATION=OFF (Data is output when COMBINATION=ON)
Note 5)SHARPNESS data for OFF is output when MULTI=OFF, and SHARPNESS data for ON is output when MULTI=ON.
[5] <GUS> (GET CONV. USER DATA)=Deflection and convergence data memory area setting state is output.
1
STX (02H)
2
Memory area selected when INPUT=VIDEO or Y/C & input signal=NTSC. (3 BYTE)
Example)US 1:Indicates CONV.MEMO-1 is selected.
3
Memory area selected when INPUT=VIDEO or Y/C & input signal=PAL
(Or other than NTSC, containing no signals). (3 BYTE)
Example)US 2:Indicates CONV.MEMO-2 is selected.
4
Memory area selected when INPUT=RGB & input signal=NTSC. (3 BYTE)
Example)US 1:Indicates CONV.MEMO-1 is selected.
5
Memory area selected when INPUT=RGB & input signal=PAL (or other than NTSC, containing no signals).
(3 BYTE)
Example)US 2:Indicates CONV.MEMO-2 is selected.
6
ETX (03H)
ADJUSTMENTS