manualshive.com logo in svg

Pioneer PDP 503CMX, Technical Manual

The Pioneer PDP 503CMX Operating Instructions Manual is essential for getting the most out of your television. Download this comprehensive manual for free, from manualshive.com, where you can conveniently find and access the information you need. Perfect for optimizing your TV experience with step-by-step instructions and troubleshooting tips.

Share
Download
background image

68

How to use the standard mounting components

4.1 Standard Mounting Components Features and Characteristics

In addition to reliability and the vivid display resulting from its large screen area, brightness, and image quality, the

plasma display (PDP-503CMX/PDP-503MXE and PDP-433CMX/PDP-433MXE) is thin and lightweight, enabling mounting

in locations not possible for conventional displays.

We considered various mounting patterns and operating conditions during the design of the plasma display (PDP-

503CMX/PDP-503MXE and PDP-433CMX/PDP-433MXE). A wide range of standard mounting hardware is available for

easy mounting.

Video card: PDA-5002

This is the video card needed for video input and RGB input. This product has three input systems: the component

1 system, S input 1 system, and the digital RGB input 1 system. And the component input and S input are compatible

with various audio inputs, and have a wide range of uses including visual display and visual performance.

Table-top Stand: PDK-TS01

This on-board support designed for the plasma display enables vertical placement of the unit.

Tiltable wall-mount Hardware: PDK-5011

Permits tilting of the display downward from the horizontal by up to 25 degrees. Mount depth is 143 mm or less(in

vertical position, without optional speaker). This hardware permits a wide range of viewing angles.

Tiltable wall-mount Hardware: PDK-5013

Distance from the rear surface of the plasma display to the wall is 32 mm.

It is provided with many installation holes for various hypothetical walls and it is constructed so that it can be easily

attached to the main unit.

Plasma Display Ceiling Suspension Hardware: PDK-5012

Simple rod-type mounting hardware permitting display panning over a range of 45 degrees, and up to 25-degree

downward tilting from the horizontal. This hardware enables installation of the unit in a wide range of locations.

Mobile Cart: PDK-5014

This is an extremely stable movable stand that one person can use to freely move the plasma display.

It can also be used to adjust the screen height and the screen angle of tilt to match the line of sight according to its

use.

PDP Bracket: PDK-5005 (Can be used only with the PDP-503CMX/PDP-503MXE)

Can be used as a handle when moving the unit, or as a frame when wire-suspending it or hanging it on the wall. Most

suitable for temporary use when quick, easy, and safe attachment is necessary.

Cable cover: PDA-P01

It completely conceals the complex cable arrangements to present a neat external appearance.

Speaker system: PDP-S05-LR (Can be used only with the PDP-503CMX/PDP-503MXE)

PDP-S07-LR (Can be used only with the PDP-433CMX/PDP-433MXE)

This vertical twin-speaker system, with a newly developed elliptical unit 4.5 cm wide on top and bottom with a 2.5-

cm dome cone tweeter in between, provides improved sound-field localization. Despite its compact 7.4-cm cabinet,

the speaker system is capable of offering powerful dynamic sound reproduction. (Note that when the speaker is

mounted to the main unit itself, the operation panel of the main unit is inaccessible.)

[503CMX/503MXE : 433CMX/433MXE]

Summary of Contents for PDP 503CMX

































































































































































































Reviews:

No comments

Related manuals for PDP 503CMX

IEI Technology AFOLUX 915A Series User Manual preview
AFOLUX 915A Series
Brand: IEI Technology Pages: 155
CUE touchCUE-12 User Manual preview
touchCUE-12
Brand: CUE Pages: 32
Efco TPM-A22FP User Manual preview
TPM-A22FP
Brand: Efco Pages: 28
Avery Weigh-Tronix 1040/XL User Instructions preview
1040/XL
Brand: Avery Weigh-Tronix Pages: 60
Icop PDX2-090T-5A User Manual preview
PDX2-090T-5A
Brand: Icop Pages: 35
Lenovo ThinkVision E2223s User Manual preview
ThinkVision E2223s
Brand: Lenovo Pages: 32
Philips 23HF9472 (Hungarian) Specification Sheet preview
23HF9472
Brand: Philips Pages: 2
Philips 23iF9946 Specifications preview
23iF9946
Brand: Philips Pages: 2
Philips 23PF4321/01 Specifications preview
23PF4321/01
Brand: Philips Pages: 3
Philips 23PF4310 Specification Sheet preview
23PF4310
Brand: Philips Pages: 3
Philips 23HF9472 Specifications preview
23HF9472
Brand: Philips Pages: 3
Philips 23IF9946/12 Quick Use Manual preview
23IF9946/12
Brand: Philips Pages: 4
Philips 23HF5474 Specifications preview
23HF5474
Brand: Philips Pages: 3
Philips 23-LCD HDTV MONITOR FLAT TV CRYSTAL CLEAR III 23PF9945-37B Specifications preview
23-LCD HDTV MONITOR FLAT TV CRYSTAL CLEAR III 23PF9945-37B
Brand: Philips Pages: 2
Philips 23HF5473 - annexe 1 Specifications preview
23HF5473 - annexe 1
Brand: Philips Pages: 3
Philips 22PFL5614/60 Specifications preview
22PFL5614/60
Brand: Philips Pages: 3
Philips 22PFL3415H Brochure preview
22PFL3415H
Brand: Philips Pages: 3
Philips 21PT3442B Specifications preview
21PT3442B
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands