Pioneer PDP 503CMX Technical Manual Download Page 37

Page: 37 / 192

Special Installation (Hanging on the wall)

Methods of Securing: Basic methods of securing are shown below. Avoid blocking or covering areas aside from those

indicated by

. The method indicated by a large X-mark must not be used.

Before attaching the unit to fittings, double-check that the thickness and height of the fittings,

and the number of fixing bolts is correct.

(Also refer to 3.5.1 “Mounting to fittings”.)

NOTE 1

Heated air is drawn off from the interior of the unit by fans. Before installation, consider the heat resistance of the

wall or other surfaces behind the unit. Exhaust temperatures can be 30 °C higher than the outside temperature.

NOTE 2

For wall-mounting, do not bundle the cables in a way that will obstruct ventilation.

Ex.: Installation requirements when

installed in recess in wall

Ex.: Installation when covered with a

Panting net

Requirements :

• Free air flow (With no obstructions

within a distance of 300 mm from

the unit)

• Temperature of 0–35°C

Flush-wall installation

(distance between unit and wall

less than 50 mm)

300 mm or

100 mm or more

50 mm or

Panting net

300 mm or

50 mm or

50 mm or more

Requirements :

• Free air flow (With no obstructions within

a distance of 300 mm from the unit)

around all four sides of the unit is not

necessarily required when the unit is

installed at a distance of greater than 50

millimeters away from the wall.

* Note, however, that in such cases the unit

may not be placed behind a glass panel or

any other obstruction which would create

a closed space.

• Temperature of 0–40°C

Wall-mounted installation

(distance between unit and wall

greater than 50 mm)

Requirements :

• See 3.5.3 Embedding in the wall for

installation requirements..

• Temperature of 0–40°C

Wall-embedded installation

(i.e., installation in closed space)

(distance between unit and wall

greater than 50 mm)

100 mm or more

[503CMX/503MXE]

Summary of Contents for PDP 503CMX

































































































































































































Search results

Summary of Contents for PDP 503CMX

Reviews:

Related manuals for PDP 503CMX

Brands by name

Popular brands

Pioneer PDP 503CMX, Technical Manual

Search results

Summary of Contents for PDP 503CMX

Reviews:

Related manuals for PDP 503CMX

Brands by name

Popular brands