68
En
Adjustments and Settings
11
Image position adjustment
(AV mode only)
Adjusts the horizontal and vertical positions of images on the
Plasma Display.
1
Press
HOME MENU
.
2
Select “Option”. ( / then
ENTER
)
3
Select “Position”. ( / then
ENTER
)
4
Select “H/V Position Adjust”. ( / then
ENTER
)
5
Adjust the vertical position ( / ) or horizontal position
( / ).
6
Press
HOME MENU
to exit the menu.
NOTE
• To restore the factory defaults for all the items, press / to
select “Reset” in step 4, and then press
ENTER
. A
confirmation screen appears. Press / to select “Yes”, and
then press
ENTER
.
• Adjustments are stored separately for each input source.
Automatic image position and clock
adjustments (PC mode only)
Use Auto Setup to automatically adjust positions and clock of
images coming from a personal computer.
1
Press
HOME MENU
.
2
Select “Option”. ( / then
ENTER
)
3
Select “Auto Setup”. ( / then
ENTER
)
• Auto Setup starts.
4
Press
HOME MENU
to exit the menu.
NOTE
• When Auto Setup is finished, “Auto Setup completed.”
appears.
• Even when “Auto Setup completed.” appears, Auto Setup
may have failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the PC
image and try again.
• Be sure to connect the computer to the Plasma Display and
switch it on before starting Auto Setup.
Manual image position and clock
adjustments (PC mode only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions
and clock of images when necessary.
1
Press
HOME MENU
.
2
Select “Option”. ( / then
ENTER
)
3
Select “Manual Setup”. ( / then
ENTER
)
4
Select an item to be adjusted. ( / then
ENTER
)
5
Perform adjustment. ( / or / )
• With “Clock” or “Phase” selected, you can change the
parameter using / .
6
Press
HOME MENU
to exit the menu.
NOTE
• To restore the factory defaults for all the items, press / to
select “Reset” in step 4, and then press
ENTER
. A
confirmation screen appears. Press / to select “Yes”, and
then press
ENTER
.
Position
H/V Position Adjust
Reset
Option
Auto Setup
Manual Setup
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
0
0
PDP6070HD.book Page 68 Friday, May 19, 2006 5:01 PM
