72
En
Enjoying through External Equipment
12
Using HDMI Input
The INPUT 5 and INPUT 6 terminals are HDMI terminals to
which digital video and audio signals can be input. To use the
HDMI terminal, specify the types of video and audio signals to
be received from the connected equipment. For the types of
these signals, see the operation manual that came with the
connected equipment.
Before starting the menu, press
INPUT 5
(or
INPUT 6
) on the
remote control unit or press
INPUT
on the Plasma Display to
select INPUT 5 (or INPUT 6).
For audio, the system supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
NOTE
• PC signals are not supported.
• It may take time until an image is displayed depending on the
equipment connected.
Connecting HDMI equipment
To specify the type of digital video signals:
1
Press
HOME MENU
.
2
Select “Option”. ( / then
ENTER
)
3
Select “HDMI Input”. ( / then
ENTER
)
4
Select “Video”. ( / then
ENTER
)
5
Select the type of digital video signals. ( / then
ENTER
)
• If you select “Auto”, an attempt will be made to identify
the type of digital video signals when digital video
signals are received.
6
Press
HOME MENU
to exit the menu.
NOTE
• If you select a parameter other than “Auto”, make such a
setting that results in natural color.
• If no image appears, specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
1
Press
HOME MENU
.
2
Select “Option”. ( / then
ENTER
)
3
Select “HDMI Input”. ( / then
ENTER
)
4
Select “Audio”. ( / then
ENTER
)
5
Select the type of audio signals. ( / then
ENTER
)
• If you select “Auto”, an attempt will be made to identify
the type of audio signals when audio signals are
received.
6
Press
HOME MENU
to exit the menu.
NOTE
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the
operation manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analog audio cables.
Input signal correlation table
1920
[email protected]/60Hz
720
[email protected]/60Hz
1280
[email protected]/60Hz
720(1440)
[email protected]/60Hz
1920
1080p@24Hz
Plasma Display (rear view)
HDMI equipment
HDMI cable having the
HDMI mark
(commercially available)
Audio cable
(commercially available)
Make this connection
when inputting analog
audio signals.
Viewed from below of
the Plasma Display
Item
Description
Auto
(factory default)
Automatically identifies input digital video signals.
Color-1
Digital Component Video signals (4:2:2) locked
Color-2
Digital Component Video signals (4:4:4) locked
Color-3
Digital RGB signals locked
Item
Description
Auto
(factory default)
Automatically identifies input audio signals.
Digital
Accepts digital audio signals.
Analog
Accepts analog audio signals.
PDP6070HD.book Page 72 Friday, May 19, 2006 5:01 PM
