88
KRP-500P
1
2
3
4
A
B
C
D
E
F
1
2
3
4
Command
Format
Effective Operation
Modes
Function
Remarks
[DR
V
+S00]
Every time
DRI
V
E OFF
If a command is issued in Standby mode, and the unit is left
unoperated for more than 10 seconds, the command will become void.
[DR
V
+S01]
Every time
DRI
V
E O
N
(default)
Panel drive-power O
N
/OFF (drive O
N
/OFF) is controllable.
[13] DRV (PANEL DRIVE-POWER ON/OFF)
Operation
Note:
The function of the DRI
V
E OFF key on the remote control unit for servicing is the same as that of the DR
V
S00 command.
(A function equivalent to that of the DR
V
S01 command is not provided for the remote control unit for servicing.)
Command
Format
Operation
Remarks
Effective
Operation Modes
Control
[FAJ]
During FAY
To make the status of the EEPROM on the DIGITAL
Assy "adjustment completed" and copy the data to the
EEPROM for backup
This takes at least 350 msec.
Only the status is changed, and the real data
are not erased.
[UAJ]
To make the status of the EEPROM on the DIGITAL
Assy "adjustment not completed"
[CBU]
To make the status of the EEPROM on for backup
"adjustment not completed"
Only the status is changed, and the real data
are not erased. However, if the status of the
EEPROM on the DIGITAL Assy is
"adjustment completed," the data in the
EEPROM of the DIGITAL Assy will be copied
to the EEPROM for backup upon POF.
[BCP]
To copy the backup data from the EEPROM for backup
to the EEPROM on the DIGITAL Assy
W
hen the DIGITAL Assy is to be replaced, adjustment values can be copied from the backup EEPROM to the EEPROM
of the Assy for service.
[14] FAY/FAN (ADJUSTMENT COMMANDS PERMISSION/PROHIBITION)
[15] FAJ/UAJ/CBU/BCP (BACKUP FUNCTION FOR ADJUSTMENT VALUE)
The commands FAY/FA
N
are for prohibiting/permitting panel/MTB-adjustment commands.
Command
Format
Operation
Remarks
Effective Operation
Modes
Control
[FAY]
N
ormal operation mode
while the power is on
Adjustment command is valid.
For details, refer to the section “6.1 [3] FU
N
CTIO
N
S
W
HE
N
E
N
TERI
N
G THE SER
V
ICE FACTORY MODE” of the Service
Manual for Media Receiver (KRP-M01).
[FA
N
]
During FAY
Adjustment command is invalid.
Summary of Contents for KURO KRP-500P
