3
Push MULTI-CONTROL left or right to
select the equalizer band to adjust.
Each time
MULTI-CONTROL
is pushed left or
right, equalizer bands are selected in the fol-
lowing order:
50HZ
—
125HZ
—
315HZ
—
800HZ
—
2KHZ
—
5KHZ
—
12.5KHZ
4
Push MULTI-CONTROL up or down to
adjust the level of the equalizer band.
Each time
MULTI-CONTROL
is pushed up or
down, the level of the equalization band in-
creases or decreases.
+6
to
–
6
is displayed as the level is increased
or decreased.
#
You can then select another band and adjust
the level.
5
Press BAND to cancel the 7-band gra-
phic equalizer adjustment.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Display the audio menu.
Refer to
Introduction of audio adjustments
on
page 47.
2
Use MULTI-CONTROL to select
LOUDNESS.
3
Press MULTI-CONTROL to turn loudness
on.
Loudness level (e.g.,
MID
) appears in the dis-
play.
#
To turn loudness off, press
MULTI-CONTROL
again.
4
Push MULTI-CONTROL left or right to
select a desired level.
Each time
MULTI-CONTROL
is pushed left or
right, level is selected in the following order:
LOW
(low)
—
MID
(mid)
—
HIGH
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Display the audio menu.
Refer to
Introduction of audio adjustments
on
page 47.
2
Use MULTI-CONTROL to select SUB W1.
3
Press MULTI-CONTROL to turn subwoo-
fer output on.
NORMAL
appears in the display. Subwoofer
output is now on.
#
To turn subwoofer output off, press
MULTI-CONTROL
again.
4
Push MULTI-CONTROL left or right to
select the phase of subwoofer output.
Push
MULTI-CONTROL
left to select reverse
phase and
REVERSE
appears in the display.
Push
MULTI-CONTROL
right to select normal
phase and
NORMAL
appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
!
When the subwoofer output is on, you can
select
SUB W2
.
1
Display the audio menu.
Refer to
Introduction of audio adjustments
on
page 47.
2
Use MULTI-CONTROL to select SUB W2.
3
Push MULTI-CONTROL left or right to
select cut-off frequency.
Each time
MULTI-CONTROL
is pushed left or
right, cut-off frequencies are selected in the
following order:
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
Audio Adjustments
En
49
Section
03
Audio
Adjustments
Summary of Contents for FH-P80BT
Page 1: ...Operation Manual CD RDS RECEIVER FH P80BT English ...
Page 2: ...En 2 ...