Pioneer FH-P80BT, Operation Manual

Page: 15 / 77

Notes
!
This unit
’
s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to the
next page).
!
RDS service may not be provided by all sta-
tions.
!
RDS functions such as AF and TA are only ac-
tive when your radio is tuned to an RDS sta-
tion.
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
!
Six stations for each band can be stored in
memory.
1 Press LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL up or down.
#
To return to the ordinary display, press BAND
or
LIST
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Using the remote control
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
#
You can also recall radio station frequencies
assigned to preset tuning numbers by pushing
MULTI-CONTROL
up or down during the fre-
quency display.
Receiving PTY alarm broadcasts
When the emergency PTY code broadcasts,
the unit receives it automatically (
ALARM ap-
pears). When the broadcasting ends, the sys-
tem returns to the previous source.
!
An emergency announcement can be can-
celed by pressing
TA .
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
BSM
(best stations memory)
—
REGIONAL (re-
gional)
—
LOCAL (local seek tuning)
—
PTY SEARCH (program type selection)
—
TRAFFIC ANNOUNCE
(traffic announcement
standby)
—
ALTERNATIVE FREQ
(alternative
frequencies search)
—
NEWS INTERRUPT
(news program interruption)
Notes
!
You can also select the function by pressing
FUNCTION on the remote control.
!
To return to the ordinary display, press BAND .
Operating this unit
En
15
Section
02
Operating
this
unit