Pioneer FH-P80BT, Operation Manual

Page: 52 / 77

Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Function display
!
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn
MULTI-CONTROL
to switch between the
functions in the following order.
CALENDAR (calendar)
—
CLOCK (clock)
—
OFF CLOCK (off clock)
—
FM STEP (FM tuning
step)
—
AUTO PI (auto PI seek)
—
AUX1 (auxili-
ary input 1)
—
AUX2 (auxiliary input 2)
—
DIMMER
(dimmer)
—
S/W CONTROL
(rear
output and subwoofer controller)
—
MUTE
(sound muting/attenuation)
—
DEMONSTRATION (feature demo)
—
EVER-SCROLL (ever scroll)
—
TITLE (language
selection)
—
BT AUDIO (Bluetooth audio)
—
PIN CODE INPUT (pin code input)
—
EDIT DEVICE NAME
(device name edit)
—
BT VERSION INFO.
(Bluetooth version infor-
mation)
—
BT RESET (Bluetooth reset)
—
SOFTWARE UPDATE (software update)
Use the following instructions to operate each
particular setting.
#
You can also select the function by pressing
FUNCTION on the remote control.
#
To cancel initial settings, press BAND .
Setting the date
The calender display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Use MULTI-CONTROL to select
CALENDAR.
3 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day
—
Month
—
Year
As you select segments of the calendar dis-
play the segment selected will blink.
4 Push MULTI-CONTROL up or down to
set the date.
Pushing
MULTI-CONTROL
up will increase
the selected day, month or year. Pushing
MULTI-CONTROL
down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Use MULTI-CONTROL to select CLOCK.
3 Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing
MULTI-CONTROL
left or right will se-
lect one segment of the clock display:
Hour
—
Minute
As you select segments of the clock display,
the selected segment blinks.
4 Push MULTI-CONTROL up or down to
put a clock right.
Initial Settings
En
52
Section
04