!
If MW/LW band is selected, you can only se-
lect
BSM
or
LOCAL
.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
1
Display the function menu.
Refer to
Introduction to advanced operations
on the previous page.
2
Use MULTI-CONTROL to select BSM in
the function menu.
3
Press MULTI-CONTROL to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
#
To cancel, press
MULTI-CONTROL
again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Display the function menu.
Refer to
Introduction to advanced operations
on the previous page.
2
Use MULTI-CONTROL to select LOCAL in
the function menu.
3
Press MULTI-CONTROL to turn local
seek tuning on.
#
To turn local seek tuning off, press
MULTI-CONTROL
again.
4
Push MULTI-CONTROL left or right to
set the sensitivity.
FM:
LEVEL 1
—
LEVEL 2
—
LEVEL 3
—
LEVEL 4
MW/LW:
LEVEL 1
—
LEVEL 2
The
LEVEL 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Selecting alternative frequencies
When the tuner cannot get a good reception,
the unit automatically searches for a different
station in the same network.
1
Display the function menu.
Refer to
Introduction to advanced operations
on the previous page.
2
Use MULTI-CONTROL to select
ALTERNATIVE FREQ in the function menu.
3
Press MULTI-CONTROL to turn AF on.
#
To turn off, press
MULTI-CONTROL
again.
Notes
!
Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
!
When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the station
’
s AF list. No preset
number appears on the display if the RDS
data for the station received differs from that
of the originally stored station.
!
During AF search, sound may be temporarily
interrupted.
!
AF can be turned on or off independently for
each FM band.
Using PI Seek
If the tuner cannot find a suitable station, or
reception status becomes bad, the unit auto-
matically searches for a different station with
the same programming. During the search,
PI SEEK
is displayed and the output is muted.
Using Auto PI Seek for preset stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
!
The default setting for Auto PI Seek is off.
See
Switching Auto PI Seek
on page 53.
Operating this unit
En
16
Section
02
Summary of Contents for FH-P80BT
Page 1: ...Operation Manual CD RDS RECEIVER FH P80BT English ...
Page 2: ...En 2 ...
