Selecting a channel in the channel
category
1
Select the channel select settings to
CATEGORY.
Refer to
Switching the XM channel select mode
on the previous page.
2
Push MULTI-CONTROL up or down to
select the desired channel category.
3
Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
Displaying the Radio ID
Channel number select setting
1
Select the channel select settings to
CHANNEL NUMBER.
Refer to
Switching the XM channel select mode
on the previous page.
2
Push MULTI-CONTROL left or right to
select RADIO ID.
#
If you select another channel, display of the ID
code is canceled.
#
Display of the ID code repeats displaying
RADIO ID
and the ID code one after the other.
SIRIUS Satellite Radio tuner
Listening to SIRIUS Satellite Radio
You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
1
SIRIUS band indicator
2
SIRIUS preset number indicator
3
SIRIUS channel number indicator
4
SIRIUS channel name
Shows the channel name of broadcast
channel.
%
Select a SIRIUS band.
Press
BAND
.
#
Band can be selected from
SR1
,
SR2
or
SR3
.
%
Select a channel.
Push
MULTI-CONTROL
left or right.
#
If you push and hold
MULTI-CONTROL
left or
right, you can increase or decrease channel num-
ber continuously.
#
You can also perform tuning from a desired
channel category. (Refer to
Selecting a channel in
the channel category
on page 61.)
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Available accessories
En
59
Section
06
A
vailable
accessories
