3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
To return to the ordinary display, press
BAND
or
LIST
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Using the remote control
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
#
You can also recall radio station frequencies
assigned to preset tuning numbers by pushing
MULTI-CONTROL
up or down during the fre-
quency display.
Introduction to advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3
Turn MULTI-CONTROL to select the
function.
BSM
(best stations memory)
—
LOCAL
(local
seek tuning)
Notes
!
You can also select the function by pressing
FUNCTION
on the remote control.
!
To return to the ordinary display, press
BAND
.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
1
Display the function menu.
Refer to
Introduction to advanced operations
on this page.
2
Use MULTI-CONTROL to select BSM in
the function menu.
3
Press MULTI-CONTROL to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
#
To cancel, press
MULTI-CONTROL
again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Display the function menu.
Refer to
Introduction to advanced operations
on this page.
2
Use MULTI-CONTROL to select LOCAL in
the function menu.
3
Press MULTI-CONTROL to turn local
seek tuning on.
#
To turn local seek tuning off, press
MULTI-CONTROL
again.
4
Push MULTI-CONTROL left or right to
set the sensitivity.
FM:
LEVEL 1
—
LEVEL 2
—
LEVEL 3
—
LEVEL 4
AM:
LEVEL 1
—
LEVEL 2
Operating this unit
En
15
Section
02
Operating
this
unit
