Pioneer FH-P800BT - Premier Radio / CD Operation Manual Download

Page: 56 / 80

Playing songs on iPod

Basic operation

You can use this unit to control an interface
adapter for iPod, which is sold separately.

Song number indicator

Play time indicator

Fast forward or reverse

Push and hold

MULTI-CONTROL

left or right.

Select a track

Push

MULTI-CONTROL

left or right.

Notes

Read the precautions for iPod on page 78.

While iPod is connected to this unit,

PIONEER

(or

(check mark)) is displayed on the iPod.

If an error message is displayed, refer to

Error

messages

on page 73.

When the ignition switch is set to ACC or ON,
the iPod

’

s battery is charged while the iPod is

connected to this unit.

While the iPod is connected to this unit, the
iPod cannot be turned on or off.

Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.

The iPod is turned off about two minutes after
the ignition switch is set to OFF.

Displaying text information on
iPod

The operation is the same as that of the iPod
connected to USB interface of this unit. (Refer
to

Displaying text information on iPod

on page

24.)

Browsing for a song

The operation is the same as that of the iPod
connected to USB interface of this unit. (Refer
to

Searching songs by category

on page 23.)

However, the selectable categories are slightly
different. Selectable categories are

PLAYLISTS

(playlists)

—

ARTISTS

(artists)

—

ALBUMS

(albums)

—

SONGS

(songs)

—

GENRES

(genres)

Introduction to advanced
operations

Press MULTI-CONTROL to display the

main menu.

Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se-
lect.
The function menu is displayed.

Turn MULTI-CONTROL to select the

function.
PLAY MODE

(repeat play)

—

SHUFFLE MODE

(shuffle)

—

PAUSE

(pause)

Function and operation

PLAY MODE

and

PAUSE

operations are basi-

cally the same as that of the built-in CD player.

Function name

Operation

PLAY MODE

Refer to

Selecting a repeat play

range

on page 19.

However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the iPod are:

REPEAT ONE

–

Repeat the cur-

rent song

REPEAT ALL

–

Repeat all

songs in the selected list

PAUSE

Refer to

Pausing playback

on page

19.

Available accessories

Section

Summary of Contents for FH-P800BT - Premier Radio / CD

















































































Search results

Summary of Contents for FH-P800BT - Premier Radio / CD

Reviews:

Related manuals for FH-P800BT - Premier Radio / CD

Brands by name

Popular brands

Pioneer FH-P800BT - Premier Radio / CD, Operation Manual

Search results

Summary of Contents for FH-P800BT - Premier Radio / CD

Reviews:

Related manuals for FH-P800BT - Premier Radio / CD

Brands by name

Popular brands